What a Proper Air Conditioning Service Involves (and Why Autumn and Winter Are a Good Time to Book One)

For many people, air conditioning is a summer topic. Yet if your system also heats, as most heat pump style units do, it’s working through the colder months too. And for systems that mostly cool, the quieter months are the easiest time to get them looked at without waiting for the first hot week to find a problem.

Here’s what a proper service involves, what the rules say, and how to plan maintenance so it doesn’t become an emergency.

Why servicing matters

An air conditioning system moves heat using refrigerant, fans, coils, filters and drainage. Over time dust collects on filters and coils, drain lines can block, and small leaks or worn parts can develop. None of this is dramatic at first. You may simply notice the unit taking longer to reach temperature, making new noises, or leaving a damp patch under an indoor unit.

Regular servicing is about catching those things early, keeping the system working as designed, and making sure any legal checks are covered.

What a good service usually covers

Exactly what’s included depends on the system, its age and whether it’s a home split system or a larger commercial installation. As a general guide, an engineer will typically:

  • Inspect and clean indoor unit filters and check the coils and fans.
  • Check the outdoor unit for debris, damage, corrosion and airflow.
  • Check condensate drains and pumps so water can leave the system properly.
  • Check electrical connections, controls and the remote or wall controller.
  • Check refrigerant circuit condition and look for signs of leaks.
  • Test the system in cooling and heating modes and note anything that needs attention.
  • Record what was done and give you a clear explanation of any repairs recommended.

A good engineer will tell you plainly what is a necessary repair, what can wait, and what is simply worth keeping an eye on.

F-gas leak checks are part of the picture

Most air conditioning and heat pump systems use fluorinated gases (F gases) as refrigerant. Under the GB F-gas rules, whoever operates the equipment is responsible for having it checked for leaks at set intervals, depending on how much refrigerant it holds (measured as tonnes of CO2 equivalent). The GOV.UK guidance on checking F-gas equipment for leaks sets out the thresholds: for example, equipment holding 5 to less than 50 tonnes CO2 equivalent must be checked at least every 12 months.

If you’re unsure whether your system is covered, your installation paperwork or the rating plate on the outdoor unit will show the refrigerant type and charge, and your engineer can confirm it for you. Any leak found must be repaired as soon as possible, so a planned service is a far better moment to find one than a breakdown.

Homes and businesses have different needs

At home, a yearly service is a sensible habit for systems used regularly, with filters cleaned between visits as the manufacturer advises. It’s a good moment to ask about anything that has changed, such as a noisy fan or a unit that struggles in very cold weather.

In offices, shops and other business premises, air conditioning is part of keeping staff and customers comfortable, and a failure at a busy time costs more than a planned visit. Businesses with larger systems should also be aware of the five-yearly energy inspection that applies to systems over 12kW effective rated output in England and Wales, set out in the GOV.UK guide to air conditioning inspections.

A planned maintenance arrangement, with visits scheduled in advance and records kept, makes it much easier to show that checks are up to date.

Why book outside the summer rush

Summer is the busiest time for air conditioning engineers, because that’s when people notice a system isn’t coping. Booking a service now means:

  • You can choose a convenient date rather than taking whatever is left in a heatwave.
  • Any repair or part needed can be dealt with before the system is under heavy demand.
  • If your unit heats as well as cools, you know it’s in good shape for the colder weeks.
  • A business can plan the work around quiet periods and budget for it.

How PDQ can help

PDQ Air Conditioning has been trading since 2004 and is led by Robert Perry, an air conditioning engineer of over 30 years. Based in Borough Green near Sevenoaks, we supply, install, service and maintain air conditioning and heat pumps for homes and businesses across Kent, Sussex, Surrey, London and Essex.

We supply, install, service and provide warranty support for Haier, Samsung, Hitachi and Midea systems. We also service and maintain Daikin, Mitsubishi and Fujitsu units, as well as systems installed by others.

If you’d like a service, a repair, or advice on whether your system needs attention, get in touch. Call us on 01732 884703 (Monday to Friday 9:00 to 18:00, Saturday 9:00 to 16:00), email info@pdq-airconditioning.com, or request a quote through the website.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Call now