When people think of air conditioning, they usually picture a hot July afternoon. But most modern split systems are reverse-cycle units, which means the same equipment that cools your rooms in summer can also heat them in winter. As the evenings draw in across Kent and the South East, it’s a good time to look at how that works, how to get the best from a system you already have, and what has changed with government support for this kind of heating.
How air conditioning heats a room
A reverse-cycle air conditioner is a type of heat pump, often called an air-to-air heat pump. In heating mode, it takes heat from the outside air, even on cold days, and moves it indoors using refrigerant and a compressor. Because it is moving heat rather than generating it directly, a heat pump can deliver more heat energy than the electrical energy it uses. That’s why air-to-air systems are increasingly seen as an efficient way to heat individual rooms, offices and whole homes.
The warm air is delivered by the indoor unit, whether that’s a wall-mounted unit, a ceiling cassette or a ducted system, and it can be controlled room by room with a remote, a wall controller or, on many newer systems, an app.
What’s normal in winter
If you’re using your system for heating for the first time, a few things can look unusual but are perfectly normal:
- Defrost cycles. In cold, damp weather, frost can build up on the outdoor unit. The system will periodically pause heating to clear it. You may notice the indoor fan stop for a few minutes, and you may see what looks like steam coming from the outdoor unit. That’s water vapour from the defrost, not smoke.
- A short delay at start-up. In heating mode, many indoor units wait until the coil has warmed up before the fan starts, so you don’t get a blast of cold air.
- Steady, gentle warmth. Heat pumps tend to work best maintaining a steady temperature rather than being switched on and off in short bursts.
Simple winter care tips
You don’t need to be an engineer to keep your system in good shape over the colder months:
- Keep the outdoor unit clear. Leaves, garden furniture covers and, in a cold snap, snow can restrict airflow. Leave a clear space around the unit and don’t cover it while it’s running.
- Clean or check the indoor filters. Dusty filters make the system work harder. Your manufacturer’s handbook will tell you how to remove and clean them safely.
- Use heating mode, not just “auto”. Selecting heating mode and a sensible set temperature gives you more predictable results.
- Close doors to the rooms you’re heating. As with any heating system, keeping warm air where you want it helps.
- Book a service. A professional service checks refrigerant pressures, electrical connections, drainage and overall performance, and can spot small issues before they become a breakdown on the coldest day of the year.
Businesses: don’t forget your legal checks
For commercial owners and operators, servicing isn’t only about comfort. Under the GB F-gas rules, many air conditioning and heat pump systems above a certain refrigerant charge must have regular leak checks carried out by a suitably qualified engineer, and records must be kept. How often depends on how much refrigerant the system holds and the type of refrigerant. If you’re not sure where your equipment stands, a maintenance visit is a good chance to check and get your records in order. The government’s guidance on checking F-gas equipment for leaks sets out the requirements.
The £2,500 grant for air-to-air heat pumps
There’s also good news for homeowners thinking about switching to this kind of heating. The Boiler Upgrade Scheme, which helps property owners in England and Wales replace fossil fuel heating with low-carbon systems, now includes a grant of £2,500 towards an air-to-air heat pump. Until recently, the scheme only supported air-to-water and ground source heat pumps and biomass boilers.
According to GOV.UK and Ofgem, the key points are:
- Air-to-air heat pump grants are for residential properties only.
- You must own the property and be replacing an existing fossil fuel or electric heating system, such as gas, oil, LPG or electric heaters. You can’t get a grant to replace an existing low-carbon system.
- The new system must meet the scheme’s technical standards and fully replace the existing heating, apart from any permitted supplementary heating. It can’t be combined with a fossil fuel appliance.
- The grant is applied for by an MCS certified installer on your behalf and taken off your quote and invoice, so you don’t have to claim it back yourself.
- There is one grant per property.
Separately, the scheme still offers £7,500 towards an air source (air-to-water) or ground source heat pump, with an extra £1,500 available until March 2027 for eligible off-gas-grid homes currently heated by oil or LPG.
Every property is different, so whether a grant applies, and which system makes sense, depends on your home, how it’s heated now and how you want to use it. Ofgem’s guidance for property owners has the full details.
Talk to PDQ Air Conditioning
PDQ Air Conditioning has been supplying, installing, servicing and maintaining air conditioning and heat pumps for homes and businesses since 2004. Based in Borough Green near Sevenoaks, we cover Kent, Sussex, Surrey, London and Essex, and we work with Haier, Samsung, Hitachi and Midea systems, as well as servicing Daikin, Mitsubishi and Fujitsu units.
Whether you’d like a winter service, advice on using your existing system for heating, or a quote for a new installation, we’ll give you honest, straightforward advice. Contact us here, call 01732 884703 or email info@pdq-airconditioning.com. You can also request a quote online.
